SALES (DIRECT): 866.400.8107
SALES (DEALER): 800.909.4937

Original FlueKeepers require
1/2" square holes @ 2" c-c on the side of each rack upright post for End Clips to engage properly
(see photo on Installation page).
Other hole shapes / sizes, if at
2" c-c, may also be acceptable. Contact your DACS representative with a photo of the holes and rack post for evaluation and
approval before ordering.

Original Fluekeeper Applications & Features:

Archive Storage - Allows your sprinkler system to function as designed by providing a 3" clearance between rack and stored material. (Combined with 3" rack post width totals 6" flue space. One Fluekeeper per box level is suggested for maximum effectiveness.

Furniture and Mattress Warehousing - Keeps valuable items out of the required flue space.

Hand Loaded Boxes - Small or odd-shaped items can be kept out of the flue space. Use as many Fluekeepers per level as necessary. Fluekeeper's smooth curved surface prevents hangups and snags. Boxes slide on and off easlily.

Boltless front & rear connections - spring-loaded Fluekeeper is easy for maintenance personnel to install from the aisle side of the rack without removing any items.

Satisfies insurance company guidelines and local building inspector criteria - (may be required by International Fire Code®).

Available for new installations or scheduled monthly retrofit plans.

Heavy Duty Version - For deep rack shelves (>72")

Fluekeeper FL - Fixed Length Version - For rack posts that do not accept Spring-Loaded version clips. Fixed-length Fluekeeper installs easily with TEK® screws.

© 2013 DACS, INC. ALL RIGHTS RESERVED PUNCH DECK, FLUEKEEPER, THE PUNCH DECK LOGO AND THE FLUEKEEPER LOGO ARE REGISTERED TRADEMARKS OF DACS, INC.